Tweet
So here's some useless info. Had to replace two of the insulators panels cause I accidentally blemished them.
they are very inexpensive to obtain from your dealership.
However, they are fairly fragile and damage very easily, be careful when your cleaning around them because they tear easily.
More importantly, they are apparently made out of some sort of fiber that reminds me of fiberglass insulation. Very itchy if you tear them as expose the fibers.
Installation of the new ones can be done in less the an hour. the trickiest part is the plastic tab that hold the ABS lines actually screws onto a stud in the firewall and it has to be unscrewed to install through the hole in the new insulation panel. Also use a piece of thin cardboard against the Air condition. Condenser line to slide the panel past it without tearing into the panel or it will tear when you try and maneuver it into place.
they are very inexpensive to obtain from your dealership.
However, they are fairly fragile and damage very easily, be careful when your cleaning around them because they tear easily.
More importantly, they are apparently made out of some sort of fiber that reminds me of fiberglass insulation. Very itchy if you tear them as expose the fibers.
Installation of the new ones can be done in less the an hour. the trickiest part is the plastic tab that hold the ABS lines actually screws onto a stud in the firewall and it has to be unscrewed to install through the hole in the new insulation panel. Also use a piece of thin cardboard against the Air condition. Condenser line to slide the panel past it without tearing into the panel or it will tear when you try and maneuver it into place.
Comment