Need help picking out a cam

[Orangecrush]

So I am in the market for a cam ...... Just looking for some info on who has what and who likes what..... My car as far as performance goes is bone stock and its automatic

[Crime2]

IMO look at Jannetty Racing. He has done a lot testing and has some nice cam packages. You can use one of the forum sponsors for the install.


Sent from my iPhone using Tapatalk. If is spelllled wrong deal with it.

[VenomInside]

I've always had EXCELLENT results with comp.

I would talk to the guys at speed inc. They've done a lot of my other cars.

[Bubbles]

Don't go off the shelf. Find a set of heads, get them flow tested and build your cam from those numbers.

I have a guy who can do this and advise you. He comes highly recommended.

Or call Dan Bills at FLP (one of our sponsors) tell him you are from C5G.

[VenomInside]

Don't go off the shelf. Find a set of heads, get them flow tested and build your cam from those numbers.

I have a guy who can do this and advise you. He comes highly recommended.

Or call Dan Bills at FLP (one of our sponsors) tell him you are from C5G.

What is wrong with some of the "off the shelf" cams? I've used them in some of my old cars and have gotten great results. I've never had one issue.

I've also used various custom ground cams. Some that complimented the heads (when I did p&p the heads) and others I just left the heads alone. I've had more issued withh custom ground cams than anything.

Now I am not saying they are not good but it's just with my own personal trial/errors that the "off the shelf" cams seemed to work best on all of the various high hp cars that I have owned.

[priz23]

What is wrong with some of the "off the shelf" cams? I've used them in some of my old cars and have gotten great results. I've never had one issue.

I think the fast list backs off the shelf cams(but never discount heathers advice). I have a comp cam and enjoy it, but never had a cam before so don't have anything to compare to.

If you're not sure what you need, get with one of our sponsors (speed, libertyville or flp) and talk with them to help guide you. I had no clue what specs I wanted or needed. Met with libertyville and told them what results i wanted and leaned on their expertise to put the build together.

[litle88]

If your stock you'll need some more supporting mods than just the cam.
What are your goals?
Do you still want vvt or do you want to get an Ls3 conversion?
You'll also need a converter matched to your cam, then depending on your cam you might need gears to go with it.
You need to see where your ultimate goal is going to be. Just my .2
Just please don't be one of those guys that are worried about mpg's or drive ability because you have in your possession a CAMARO SUPERSPORT WITH A 6.2L MOTOR LOL