Tweet
Did you look up info on the cai you installed? Some cai's will throw off codes others will not. I made sure the cai i got (roto fab) would not throw off any codes before I ordered.
-
sigpic -
When I put my Roto-Fab on I went out and jumped on it and threw a code. Mine was because it was reading lean. It normally takes around 100 miles or so for the computer to learn all that extra air flow and make all of its adjustments. I reset my light and all is good. If you want your light reset let me know I will hook you up.G-MANComment
-
Thanks, I'll keep the site updated on what happens with my light, gonna get it cleared again this week sometime.Comment
-
So I bought one of those auto scanners (Actron cp9575) and the codes are:
P2179 System Too Lean Off Idle
P2177 System Too Lean Off Idle
I've cleared them and we'll see after couple drive cycles.Comment
-
Well I just became an authorized dealer for Trifecta and I know I can get a tune for you to clear the codes! I am doing my car next week.......
I will offer a great discount to C5G members......2018 ZL1 A10 Convertible, Kooks Longtube Headers (to be installed 8Jan) Full Kooks exhaust from Kooks R&D in Mooresville, NC, ZL1 painted GFX, My ShowStopper Custom Engine Cover Kit and painted CAI. For Sale! Color Shift Lights coming soon[/SIZE][/B]
Comment
-
-
Did the codes go away and stay gone?2018 ZL1 A10 Convertible, Kooks Longtube Headers (to be installed 8Jan) Full Kooks exhaust from Kooks R&D in Mooresville, NC, ZL1 painted GFX, My ShowStopper Custom Engine Cover Kit and painted CAI. For Sale! Color Shift Lights coming soon[/SIZE][/B]
Comment
-
No, I get them back every three days. I can tell I have small leaks where my axle backs were installed. Not sure if that would cause it. I'm gonna get them welded better. If not, maybe I have a vacuum leak from cai. Also, now once a week when I start I have misfires. Only when starting once a week. Other than that still runs nice.
You ready to do Tunes?Comment
-
Yes I am ready, I have my laptop and would need some of your info, but I can come to you and do the tune. Let me know what you would want to do do. I would need all your mods and your VIN and if you have an A6 I will be able to do Trans tune too. I will also keep a copy of the stock tune if you need to go back to stock.2018 ZL1 A10 Convertible, Kooks Longtube Headers (to be installed 8Jan) Full Kooks exhaust from Kooks R&D in Mooresville, NC, ZL1 painted GFX, My ShowStopper Custom Engine Cover Kit and painted CAI. For Sale! Color Shift Lights coming soon[/SIZE][/B]
Comment
-
-
OK I sent you an email and I also got the codes you said before are there any others?2018 ZL1 A10 Convertible, Kooks Longtube Headers (to be installed 8Jan) Full Kooks exhaust from Kooks R&D in Mooresville, NC, ZL1 painted GFX, My ShowStopper Custom Engine Cover Kit and painted CAI. For Sale! Color Shift Lights coming soon[/SIZE][/B]
Comment
-
:driver:Huh, have went five days now since had my axel back welded on instead of the clamps and no codes. Could that small leak been throwing codes and causing those start up misfires? Crossing my fingers. Normally light goes on in 3 days.Comment
-
It could go get the codes read again and if no codes the computer has learned the new exhaust and the welding may have just helped it!2018 ZL1 A10 Convertible, Kooks Longtube Headers (to be installed 8Jan) Full Kooks exhaust from Kooks R&D in Mooresville, NC, ZL1 painted GFX, My ShowStopper Custom Engine Cover Kit and painted CAI. For Sale! Color Shift Lights coming soon[/SIZE][/B]
Comment
-
6 Days no code. The leak at the axel back must have been the problem. I was getting codes every three days for a month. I have a hand held and still no codes. I win.Comment
-
Sweet!!!!! You should still drive my car and see if you can tell the difference..2018 ZL1 A10 Convertible, Kooks Longtube Headers (to be installed 8Jan) Full Kooks exhaust from Kooks R&D in Mooresville, NC, ZL1 painted GFX, My ShowStopper Custom Engine Cover Kit and painted CAI. For Sale! Color Shift Lights coming soon[/SIZE][/B]
Comment
atsak:
Comment