V6 LLT Ported Intake/Throttle Body Install

[rnikolich9]

I'll most likely be going with the IPF supercharger unless over the next month or two the top mounted supercharger from RX that was just released is proven better.

Sent from my EVO using Tapatalk 2

yea we were looking at the IPF one too.. I've heard and read good things about it

[JBruno88]

Time to start port matching the upper intake to the lower!uploadfromtaptalk1359229114399.jpg

Sent from my EVO using Tapatalk 2

[SYCK SS]

Good Luck!

[JBruno88]

More goodies to check off the winter mod list.









Sent from my EVO using Tapatalk 2

[JBruno88]

Went and picked up my ported intake and throttle body today. Also got my wheels re powder coated due to a bit of curb rash. Also picked up a set of drag radials from 1stGM and tyvm. Can't wait to get to the track. Install pics to come tomorrow.

Sent from my EVO using Tapatalk 2

[SYCK SS]

Very nice man! I am very excited to see what the results are. You gonna be there the last weekend of March?

sent from my galaxy s3. that would explain the errors.

[JBruno88]

I'll be there if my custom DSS drive shaft is manufactured in time.

PSJ said you may have some info on some matching 18s that would fit up front?

Sent from my EVO using Tapatalk 2

[SYCK SS]

were they c5 or c6 rims?

[JBruno88]

C6

Sent from my EVO using Tapatalk 2

[JBruno88]

Found 18 x 9.5 C6 Z06 rims on Ebay in the same rim, 56 mm offset, I wonder if those would fit.

Sent from my EVO using Tapatalk 2

[JBruno88]

Here is the thread with pics on C5.

http://www.camaro5.com/forums/showthread.php?t=277926

And the link to the wheels on Ebay.

http://item.mobileweb.ebay.com/viewitem?itemId=390484737275&cmd=VIDESC

Sent from my EVO using Tapatalk 2

[SYCK SS]

ah ok, I have a set of 18x9.5 c6 rims like that and i put them on the front of my car. When i lowered the car on the ground and the rim was hitting the actual strut tower. i bet with a spacer you could get them to fit if you are comfortable running a spacer of front. the proper offset you would need for the front with this rim without a spacer would be +35mm or less. I could not find one

heres the link to where you can get them from. part number - 1089540342
Corvette C6 Z06 - Gloss Black - Factory Reproductions

the 10.5 rim is very big. I only run the 9.5 for my radials and fit a 305/45/18 on em.



**EDIT: just a piece of info - front stock offset is +35mm and the rear is +40mm

[JBruno88]

So I could go with the 18 x 9.5 with the +40mm offset up front, I would just have to find a spacer to make up the 5mm.

Sent from my EVO using Tapatalk 2

[SYCK SS]

So I could go with the 18 x 9.5 with the +40mm offset up front, I would just have to find a spacer to make up the 5mm.

Sent from my EVO using Tapatalk 2

Yup, thats what it looked like. I have a 305 wide tire on it which was large so for the front with no bigger than a 275 i would say. I know you have a spacer with the rims you picked up, maybe see if that would space it out enough.

[LadiesMan217]

Where did you get that from and do you mind me asking what the price was?